Axess Ready CM-1115-RT-AR Installation Guide download pdf (Page 10)

CM-1115(20)-RT-AR User Manual

Page 9

V. Initial Set-Up

(continued)

Manage

Open Browser: Opens the web browser interface for the selected AR.

Upgrade Firmware: Starts the Firmware Upgrade dialogue

Firmware Upgrade Requirements

Valid firmware file.

Administrative login credentials.

“Upgrade Enable” must be set to yet, set via web page or CLI

Set

IP Address: Changes the IP address of the selected AR

Factory Defaults: Return the selected AR to a Factory Default state. This action

must be performed within the first 2 minutes after powering up the unit.

Local Address: Select the IP address to Discover on. This may be necessary for

computers with multiple network connections.

Exit

Exits the DMU program.

Help

Online Help: Opens a web browser to online help resources.

About: Displays DMU version information.

Setting the IP Address

ARs are configured with a factory default IP address of 192.168.1.254.

To set the AR’s IP address using one of the following methods, the computer and AR must be on

the same local network.

DMU: Follow the steps in the preceding subsection to set the IP address using the Device

Management Utility (DMU).

CLI: These are the basic commands to set the network parameters. After setting these

parameters, the AR will need to be rebooted for the settings to take effect. Any command that

requires rebooting of the AR will provide a prompt to do so. All commands may be entered as

required before rebooting. Manually specifying the IP address via CLI automatically sets the

address as static.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

No comments

Axess Ready CM-1115-RT-AR Installation Guide Page 10